CCIE系列認(rèn)證CCIE DC多項選擇題每日一練(2019.03.27)

多項選擇題
When creating a role in a Cisco Nexus 7000 Series Switch， rules are used to define the type of operations that a role will allow the user to perform. Which two of these parameters cannot be applied as a rule？（）
A. port-profile
B. command
C. access-list
D. feature-group
E. OID
多項選擇題
n1kv-l3（config）# show lacp offload status Current Status ： Enabled Running Config Status ： Enabled Saved Config Status ： Disabled What two facts does the output signify？（）
A. LACP is enabled on the Nexus 1000v.
B. LACP will be offloaded to the upstream switch.
C. LACP will be negotiated to the VM.
D. LACP is negotiated by the VSM.
E. LACP is negotiated by the VEM in all instances.
多項選擇題
Overlay Transport Virtualization （OTV） overlay interface is a logical multiaccess and multicast- capable interface that must be explicitly defined by the user and where the entire OTV configuration is applied. Which statements are true about OTV overlay interface？（）
A. When an OTV edge device receives a Layer 2 frame destined for a remote data center site， the frame is logically forwarded to the overlay interface.
B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.
C. When the OTV edge device receives a Layer 2 frame destined for a remote data center site， the frame is logically forwarded to the join interface.
D. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the overlay interface toward the routed domain.
多項選擇題
The hardware and software configurations for vPC+ are similar to that of traditional vPC. What are the differences in the configuration of vPC+？（）
A. FabricPath switch ID must be configured under the vPC domain.
B. Virtual switch ID of vPC+ must be configured under FabricPath domain.
C. On Cisco Nexus 7000 Series Switch， F1 interfaces must be used as the vPC+ peer links.
D. The vPC+ peer link must be configured as a Cisco FabricPath core port （switchport mode fabricpath）.
E. FabricPath subswitch ID must be configured under the vPC domain.
多項選擇題
A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required， and what other changes will need to be made？（）VSM-PRI-188# sh int vethernet 5 Vethernet5 is up Port description is VM001， Network Adapter 2 HardwarE. Virtual， address： 0050.56b0.001e （bia 0050.56b0.001e） Owner is VM "VM001"， adapter is Network Adapter 2 Active on module 5 VMware DVS port 484 Port-Profile is VM-vlan-10 Port mode is access VSM-PRI-188# sh int vethernet 6 Vethernet6 is up Port description is VM002， Network Adapter 1 HardwarE. Virtual， address： 0050.56b0.0020 （bia 0050.56b0.0020） Owner is VM "VM002"， adapter is Network Adapter 1 Active on module 5 VMware DVS port 485 Port-Profile is VM-vlan-10 Port mode is access
A. Monitor session 1 type span       Source interface veth5 both      Destination interface veth6      No shut
B. monitor session 1     source vlan 10      destination interface veth6      no shut
C. monitor session 1 type er-span      source interface vlan 10      destination ip 10.1.1.10      no shut
D. VM002 must be removed from the Nk1V
E. Move VM002 to Module 5
F. Restart the VEM on module 5